Slide Hammer And Clutch Removal Kit

Specially designed for the safe removal of clutch assemblies, it is possible to remove the clutch without having to remove either the engine or transmission.

Applications: Vauxhall/Opel Nova, Corsa, Astra, Belmont, Kadett, Tigra, Cavalier, Ascona, Vectra and Calibra (Front Wheel drives models with 4 and 5 speed gearboxes).

KIT CONTAINS:

ONE SLIDE HAMMER (M2513258)

ONE INPUT SHAFT PULLER

The threaded bolt end of the puller allows the operator to screw into the input shaft. 

The shaft can be withdrawn by simply gripping the puller by hand if it is loosely fitted. 

The other end has an internal thread (5/8" UNF); it can combine with the "SLIDE HAMMER".

THREE CLUTCH RETAINING CLIPS

Allows the clutch to pass between the flywheel and bell housing, the pressure plate must be compressed against the diaphragm spring.

The three clips will secure the assembly in the compressed position.